Qmob

Download Qmob D10 MTK 6261 Flash File

adminAugust 27, 2017 QmobLeave a Commenton Download Qmob B120 MTK 6260 Flash File

About

Device name : Qmob

Model Number : D 10

CPU Type : MTK6261

Language : Multi

Password : No

Credit : Free

Requirements

1. Download and install MTK USB device driver
2. Download and install Cm2 or any supported box setup

Qmob D10 Flash File Read Info

Wait for phone…
Phone found! [ 15 ]
Sync…
Sync Ok, read regs…
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 8B99199C9F57185A1572CF3835628D45
BROM Protocol Version : 05
Setting…
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target …
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now …

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info : KEYTAK61D_GB_11C_PCB01_gprs_MT6260_S00.T2014_VERSION.bin
Saved to : C:\InfinityBox\CM2MTK\Read_out\KEYTAK61D_GB_11C_PCB01_gprs_MT6261_S00.T2014_VERSION.bin

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

How to Flash Qmob D10 Firmware

• Download and install MTK USB device driver
• Download Firmware and extract it
• Open Cm2 or any supported box setup.
• Choose correct device CPU type and Choose flash file.
• Wait while file added.
• Power off device,remove battery.
• Connect device with USB data cable through pc and insert battery again.
• Click on flash and wait while complete flash
• At the complete of Flash remove USB data cable,remove battery ,insert again and power on device.
• Enjoy you have done it.

Note : Please make a back up of your device before install or update Firmware

Qmob Q3310 SPD 6531 Flash File

About

Device name : Qmob

Model Number : Q3310

CPU Type : 6531

Language : Multi

Password : No

Credit : Free

Requirements

1. Download and install SPD USB device driver
2. Download and install Cm2 or any supported box setup

How to Flash Qmob 3310  Firmware

• Download and install SPD USB device driver
• Download Firmware and extract it
• Open Cm2 or any supported box setup.
• Choose correct device CPU type and Choose flash file.
• Wait while file added.
• Power off device,remove battery.
• Connect device with USB data cable through pc and insert battery again.
• Click on flash and wait while complete flash
• At the complete of Flash remove USB data cable,remove battery ,insert again and power on device.
• Enjoy you have done it.

Note : Please make a back up of your device before install or update Firmware

Qmob Q gold2 Flash File

About

Device name : Qmob

Model Number : Gold2

CPU Type : MTK6261

Language : Multi

Password : No

Credit : Free

Requirements

1. Download and install MTK USB device driver
2. Download and install Cm2 or any supported box setup

Qmob Gold2 Flash File Read Info                Wait for phone...

Phone found! [ 61 ]

Sync...

Sync Ok, read regs...

Inital regs read done

Boot Info : 

BB_CPU_ID : 6261

BB_CPU_HW : CB01

BB_CPU_SW : 0001

BB_CPU_SB : 8000

BB_CPU_NM : [MediaTek] MT6261_S0000

BB_CPU_SN : F3D9242825D50B8D86EDAE16C3C30AA0

BROM Protocol Version : 05

Setting...

Setting done , result code 0x000E

BROM stage done

Seek and prepare DownloadAgent

DownloadAgent matching HW Found!

DA verify and select done

Sending DA to target ...

DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E

SOC_VERIFY : 0xC1

BOOT_STYLE : SF_FLASH_BOOT

NOR Flash IC initialized

[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV

[0] : FLASH_DIE : 00EF 0070 0016 0000 

[0] : FLASH_LEN : 0x00400000

SDS_INFO : 0x003FE000 , 0x00002000

INT_RAM : 0x0000D000

EXT_RAM : 0x00400000

Reading Flash Content now ... 

Read Flash now

Read Ok , 4194304 bytes read

Check and collect compile info

File_Info   : HONGYU61M_11C_PCB01_gprs_MT6261_S00.QMOBILE_GOLD2_V06_161230.bin

FileVersion : QMobile_Gold2_V06_161230

Saved to : C:\InfinityBox\CM2MTK\Read_out\HONGYU61M_11C_PCB01_gprs_MT6261_S00.QMOBILE_GOLD2_V06_161230.bin

How to Flash Qmob D10 Firmware

• Download and install MTK USB device driver
• Download Firmware and extract it
• Open Cm2 or any supported box setup.
• Choose correct device CPU type and Choose flash file.
• Wait while file added.
• Power off device,remove battery.
• Connect device with USB data cable through pc and insert battery again.
• Click on flash and wait while complete flash
• At the complete of Flash remove USB data cable,remove battery ,insert again and power on device.
• Enjoy you have done it.

Note : Please make a back up of your device before install or update Firmware