Download infinix hot4 flash file

About

Device name : infinix

Model Number : hot4

CPU Type : mt6580 6.0

Language : Multi

Password : No

Credit : Free

Requirements

1. Download and install MTK USB device driver
2. Download and install Cm2 or any supported box setup

infinix hot4 Flash File info  

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

Wait for phone...

Phone found! [ 4 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6580

BB_CPU_NME : [MediaTek] MT6580_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x94

NAND Flash : NOT INSTALLED

eMMC Flash : 150100513832334D4200690CE48FA3F5

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , BM328

[eMMC] : FLASH_CID : 150100513832334D4200690CE48FA3F5

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000003A3E00000

[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]

DEV RID    : 0xBDB9A454488EB71047BB314EC4EEBE85

INT RAM    : 0x00020000

EXT RAM    : 0x80000000 [2 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : Infinix

ProdName  : X557A1

ProdModel : Infinix HOT 4

Device    : X557

AndroidVer: 6.0

MTKxCPU   : MT6580

MTKxPRJ   : X557-H807A1D1-M-161123V168

[Read Ok] : preloader_rlk6580_we_m.bin

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : logo.bin

[Read Ok] : secro.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / rlk6580_we_m / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

FW Size : 2960 MiB

Scatter saved to : G:\Q flash file\MT6580__Infinix__Infinix_HOT_4__X557__6.0__X557-H807A1D1-M-161123V168\

All done!

Done!

Elapsed: 00:17:54

Reconnect Power/Cable!

How to Flash infinix hot4 Firmware

• Download and install MTK USB device driver
• Download Firmware and extract it
• Open Cm2 or any supported box setup.
• Choose correct device CPU type and Choose flash file.
• Wait while file added.
• Power off device,remove battery.
• Connect device with USB data cable through pc and insert battery again.
• Click on flash and wait while complete flash
• At the complete of Flash remove USB data cable,remove battery ,insert again and power on device.
• Enjoy you have done it.

Note : Please make a back up of your device before install or update Firmware

Vgo Tel i202 SPD6531 Flash File

About

Device name : Vgo Tel

Model Number : i202

CPU Type : SPD6531

Language : Multi

Credit : Free

Requirements

1. Download and install MTK USB device driver
2. Download and install Cm2 or any supported box setup

Vgo Tel i202 Flash File Read Info

Wait for phone…
Phone found! [ 15 ]
Sync…
Sync Ok, read regs…
Inital regs read done
Boot Info :
BB_CPU_ID : 6531
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [SPD6531_S0000
BB_CPU_SN : 8B99199C9F57185A1572CF3835628D45
BROM Protocol Version : 05
Setting…
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target …
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now …

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info : KEYTAK61D_GB_11C_PCB01_gprs_SPD6531_S00.T2014_VERSION.bin
Saved to : C:\InfinityBox\CM2SPDRead_out\KEYTAK61D_GB_11C_PCB01_gprs_MT6261_S00.T2014_VERSION.bin

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

How to Flash Vgo Tel i202 Firmware

• Download and install SPD USB device driver
• Download Firmware and extract it
• Open Cm2 or any supported box setup.
• Choose correct device CPU type and Choose flash file.
• Wait while file added.
• Power off device,remove battery.
• Connect device with USB data cable through pc and insert battery again.
• Click on flash and wait while complete flash
• At the complete of Flash remove USB data cable,remove battery ,insert again and power on device.
• Enjoy you have done it.

Note : Please make a back up of your device before install or update Firmware

Vgo Tel i500 MTK6261 Flash File

About

Device name : Vgo Tel

Model Number : i500

CPU Type : MTK6261

Language : Multi

Credit : Free

Requirements

1. Download and install MTK USB device driver
2. Download and install Cm2 or any supported box setup

Vgo Tel i500 Flash File Read Info

Wait for phone…
Phone found! [ 15 ]
Sync…
Sync Ok, read regs…
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 8B99199C9F57185A1572CF3835628D45
BROM Protocol Version : 05
Setting…
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target …
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now …

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info : KEYTAK61D_GB_11C_PCB01_gprs_MT6261_S00.T2014_VERSION.bin
Saved to : C:\InfinityBox\CM2MTK\Read_out\KEYTAK61D_GB_11C_PCB01_gprs_MT6261_S00.T2014_VERSION.bin

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

How to Flash Vgo Tel i500 Firmware

• Download and install MTK USB device driver
• Download Firmware and extract it
• Open Cm2 or any supported box setup.
• Choose correct device CPU type and Choose flash file.
• Wait while file added.
• Power off device,remove battery.
• Connect device with USB data cable through pc and insert battery again.
• Click on flash and wait while complete flash
• At the complete of Flash remove USB data cable,remove battery ,insert again and power on device.
• Enjoy you have done it.

Note : Please make a back up of your device before install or update Firmware

Vgo Tel i505 MTK6261 Flash File

About

Device name : Vgo Tel

Model Number : i505

CPU Type : MTK6261

Language : Multi

Credit : Free

Requirements

1. Download and install MTK USB device driver
2. Download and install Cm2 or any supported box setup

Vgo Tel i505 Flash File Read Info

Wait for phone…
Phone found! [ 15 ]
Sync…
Sync Ok, read regs…
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 8B99199C9F57185A1572CF3835628D45
BROM Protocol Version : 05
Setting…
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target …
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now …

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info : KEYTAK61D_GB_11C_PCB01_gprs_MT6261_S00.T2014_VERSION.bin
Saved to : C:\InfinityBox\CM2MTK\Read_out\KEYTAK61D_GB_11C_PCB01_gprs_MT6261_S00.T2014_VERSION.bin

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

How to Flash Vgo Tel i505 Firmware

• Download and install MTK USB device driver
• Download Firmware and extract it
• Open Cm2 or any supported box setup.
• Choose correct device CPU type and Choose flash file.
• Wait while file added.
• Power off device,remove battery.
• Connect device with USB data cable through pc and insert battery again.
• Click on flash and wait while complete flash
• At the complete of Flash remove USB data cable,remove battery ,insert again and power on device.
• Enjoy you have done it.

Note : Please make a back up of your device before install or update Firmware

Download QMOB DUAL ONE FLASH FILE

About

Device name : QMOB

Model Number : DUAL ONE

CPU Type : mt6580 7.0

Language : Multi

Password : No

Credit : Free

Requirements

1. Download and install MTK USB device driver
2. Download and install Cm2 or any supported box setup

QMOB DUAL ONE Flash File info                                                   

Wait for phone...

Phone found! [ 4 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6580

BB_CPU_NME : [MediaTek] MT6580_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FFio;

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x94

NAND Flash : NOT INSTALLED

eMMC Flash : 150100523832314D4200B229CA3F52ED

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , BM128

[eMMC] : FLASH_CID : 150100523832314D4200B229CA3F52ED

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000003A3E00000

[eMMC] : FLASH_UCP : 14910 MiB 

DEV RID    : 0xBDB9A454276C664A8D087C3517C41918

INT RAM    : 0x00020000

EXT RAM    : 0x80000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : QMobile

ProdName  : _qmobile

ProdModel : dual one

Device    : _qmobile

AndroidVer: 7.0

MTKxCPU   : MT6580

MTKxPRJ   : ALPS.L1.MP6_RGK6580.WE.L_P2

[Read Ok] : preloader_qmobile.bin

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : logo.bin

[Read Ok] : secro.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6580 / qmobile / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

Scatter saved to : G:\Q flash file \MT6580__QMobile__QMobile_Dual one__qmobile__7.0__ALPS.L1.MP_RGK6580.WE.L_P2\

All done!

Done!

Elapsed: 00:12:00

Reconnect Power/Cable!

How to Flash QMOB DUAL ONE Firmware

• Download and install MTK USB device driver
• Download Firmware and extract it
• Open Cm2 or any supported box setup.
• Choose correct device CPU type and Choose flash file.
• Wait while file added.
• Power off device,remove battery.
• Connect device with USB data cable through pc and insert battery again.
• Click on flash and wait while complete flash
• At the complete of Flash remove USB data cable,remove battery ,insert again and power on device.
• Enjoy you have done it.

Note : Please make a back up of your device before install or update Firmware

Download QMOB QNOTE FLASH FILE

About

Device name : QMOB

Model Number : QNOTE

CPU Type : mt6580 7.0

Language : Multi

Password : No

Credit : Free

Requirements

1. Download and install MTK USB device driver
2. Download and install Cm2 or any supported box setup

QMOB Qnote Flash File info                                                   

Wait for phone...

Phone found! [ 4 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6580

BB_CPU_NME : [MediaTek] MT6580_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x94

NAND Flash : NOT INSTALLED

eMMC Flash : 150100523832314D4200B229CA3F52ED

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , BM128

[eMMC] : FLASH_CID : 150100523832314D4200B229CA3F52ED

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000003A3E00000

[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]

DEV RID    : 0xBDB9A454276C664A8D087C3517C41918

INT RAM    : 0x00020000

EXT RAM    : 0x80000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : QMobile

ProdName  : _qmobile

ProdModel : QNOTE

Device    : _qmobile

AndroidVer: 7.0

MTKxCPU   : MT6580

MTKxPRJ   : ALPS.L1.MP6_RGK6580.WE.L_P2

[Read Ok] : preloader_qmobile.bin

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : logo.bin

[Read Ok] : secro.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6580 / qmobile / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

Scatter saved to : G:\Q flash file \MT6580__QMobile__QMobile_QNOTE__qmobile__7.0__ALPS.L1.MP_RGK6580.WE.L_P2\

All done!

Done!

Elapsed: 00:09:59

Reconnect Power/Cable!

How to Flash QMOB QNOTE Firmware

• Download and install MTK USB device driver
• Download Firmware and extract it
• Open Cm2 or any supported box setup.
• Choose correct device CPU type and Choose flash file.
• Wait while file added.
• Power off device,remove battery.
• Connect device with USB data cable through pc and insert battery again.
• Click on flash and wait while complete flash
• At the complete of Flash remove USB data cable,remove battery ,insert again and power on device.
• Enjoy you have done it.

Note : Please make a back up of your device before install or update Firmware