About
Device name : QMOB
Model Number : QNOTE
CPU Type : mt6580 7.0
Language : Multi
Password : No
Credit : Free
Requirements
- Download and install MTK USB device driver
- Download and install Cm2 or any supported box setup
QMOB Qnote Flash File info
Wait for phone...
Phone found! [ 4 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x94
NAND Flash : NOT INSTALLED
eMMC Flash : 150100523832314D4200B229CA3F52ED
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM128
[eMMC] : FLASH_CID : 150100523832314D4200B229CA3F52ED
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0xBDB9A454276C664A8D087C3517C41918
INT RAM : 0x00020000
EXT RAM : 0x80000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Reading Flash Content now ...
xGPT : Normalize settings Ok!
Brand : QMobile
ProdName : _qmobile
ProdModel : QNOTE
Device : _qmobile
AndroidVer: 7.0
MTKxCPU : MT6580
MTKxPRJ : ALPS.L1.MP6_RGK6580.WE.L_P2
[Read Ok] : preloader_qmobile.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6580 / qmobile / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
Scatter saved to : G:\Q flash file \MT6580__QMobile__QMobile_QNOTE__qmobile__7.0__ALPS.L1.MP_RGK6580.WE.L_P2\
All done!
Done!
Elapsed: 00:09:59
Reconnect Power/Cable!
How to Flash QMOB QNOTE Firmware
- Download and install MTK USB device driver
- Download Firmware and extract it
- Open Cm2 or any supported box setup.
- Choose correct device CPU type and Choose flash file.
- Wait while file added.
- Power off device,remove battery.
- Connect device with USB data cable through pc and insert battery again.
- Click on flash and wait while complete flash
- At the complete of Flash remove USB data cable,remove battery ,insert again and power on device.
- Enjoy you have done it.
Note : Please make a back up of your device before install or update Firmware
EmoticonEmoticon