About
Device name : hotway
Model Number : Cosmos v4
CPU Type : 7731gea
Language : Multi
Password : No
Credit : Free
Requirements
- Download and install SPD USB device driver
- Download and install Cm2 or any supported box setup
Hotway Cosmos v4 Flash File info
Read Info- > Wait phone connected ...
Phone found! [ 90 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name : sp7731geaplus_k11_qhd_zx_64_8_dt
Model Brand : HOTWAV
Model Device: scx35_sp7731gea_k11_qhd_zx_64_8
AndrVersion : 5.1
BaseBand CPU: SP7731GEA_K11_QHD_ZX_64_8
Project Ver : LMY47D release-keys
Model Ext : Cosmos V4
[read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W15.31.1_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_540x960.bin
[Read Ok] : fblogo_540x960.bin
[Read Ok] : thirdlogo.bin
[Read Ok] : forthlogo.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 1550 MiB
Saved to : G:\SP7731GEA_K11_QHD_ZX_64_8_scx35_sp7731gea_k11_qhd_zx_64_8_5.1_LMY47D_release-keys_Cosmos_V4\
Done!
How to Flash Cosmos v4 Firmware
- Download and install SPD USB device driver
- Download Firmware and extract it
- Open Cm2 or any supported box setup.
- Choose correct device CPU type and Choose flash file.
- Wait while file added.
- Power off device,remove battery.
- Connect device with USB data cable through pc and insert battery again.
- Click on flash and wait while complete flash
- At the complete of Flash remove USB data cable,remove battery ,insert again and power on device.
- Enjoy you have done it.
Note : Please make a back up of your device before install or update Firmware
EmoticonEmoticon