Download QMOB QNOTE FLASH FILE

About

Device name : QMOB

Model Number : QNOTE

CPU Type : mt6580 7.0

Language : Multi

Password : No

Credit : Free

Requirements

1. Download and install MTK USB device driver
2. Download and install Cm2 or any supported box setup

QMOB Qnote Flash File info                                                   

Wait for phone...

Phone found! [ 4 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6580

BB_CPU_NME : [MediaTek] MT6580_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x00FF

BLVersion : 0x0001

PreLoader : Active [ Boot with PL ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x94

NAND Flash : NOT INSTALLED

eMMC Flash : 150100523832314D4200B229CA3F52ED

Initialize Memory ... 

DRAM already initialized by Preloader

DAgent sent , init HW now

eMMC FlashIC initialized

[eMMC] : FLASH_VEN : 0x15 , OEM : 0100

[eMMC] : FLASH_INF : [SAMSUNG] , BM128

[eMMC] : FLASH_CID : 150100523832314D4200B229CA3F52ED

[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000

[eMMC] : FLASH_LEN : 0x00000003A3E00000

[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]

DEV RID    : 0xBDB9A454276C664A8D087C3517C41918

INT RAM    : 0x00020000

EXT RAM    : 0x80000000 [1 GiB]

BOOT TYPE  : EMMC_FLASH_BOOT

SOC VERIFY : C1

Boot Ok!

Reading Flash Content now ... 

xGPT : Normalize settings Ok!

Brand     : QMobile

ProdName  : _qmobile

ProdModel : QNOTE

Device    : _qmobile

AndroidVer: 7.0

MTKxCPU   : MT6580

MTKxPRJ   : ALPS.L1.MP6_RGK6580.WE.L_P2

[Read Ok] : preloader_qmobile.bin

[Read Ok] : lk.bin

[Read Ok] : boot.img

[Read Ok] : recovery.img

[Read Ok] : logo.bin

[Read Ok] : secro.img

[Read Ok] : system.img

[Read Ok] : cache.img

[Read Ok] : userdata.img

[ScatCFG] : MT6580 / qmobile / EMMC

Android Info saved

MAUI Meta DB saved

HWConfig Info saved

Scatter saved to : G:\Q flash file \MT6580__QMobile__QMobile_QNOTE__qmobile__7.0__ALPS.L1.MP_RGK6580.WE.L_P2\

All done!

Done!

Elapsed: 00:09:59

Reconnect Power/Cable!

How to Flash QMOB QNOTE Firmware

• Download and install MTK USB device driver
• Download Firmware and extract it
• Open Cm2 or any supported box setup.
• Choose correct device CPU type and Choose flash file.
• Wait while file added.
• Power off device,remove battery.
• Connect device with USB data cable through pc and insert battery again.
• Click on flash and wait while complete flash
• At the complete of Flash remove USB data cable,remove battery ,insert again and power on device.
• Enjoy you have done it.

Note : Please make a back up of your device before install or update Firmware

Download Vgo Tel jumbo i700 MTK6261 Flash File

About

Device name : Vgo Tel

Model Number : jumbo i700

CPU Type : MTK6261

Language : Multi

Credit : Free

Requirements

1. Download and install MTK USB device driver
2. Download and install Cm2 or any supported box setup

Vgo Tel jumbo i700 Flash File Read Info

Wait for phone…
Phone found! [ 15 ]
Sync…
Sync Ok, read regs…
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 8B99199C9F57185A1572CF3835628D45
BROM Protocol Version : 05
Setting…
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target …
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now …

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info : KEYTAK61D_GB_11C_PCB01_gprs_MT6261_S00.T2014_VERSION.bin
Saved to : C:\InfinityBox\CM2MTK\Read_out\KEYTAK61D_GB_11C_PCB01_gprs_MT6261_S00.T2014_VERSION.bin

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

How to Flash Vgo Tel jumbo i700  Firmware

• Download and install MTK USB device driver
• Download Firmware and extract it
• Open Cm2 or any supported box setup.
• Choose correct device CPU type and Choose flash file.
• Wait while file added.
• Power off device,remove battery.
• Connect device with USB data cable through pc and insert battery again.
• Click on flash and wait while complete flash
• At the complete of Flash remove USB data cable,remove battery ,insert again and power on device.
• Enjoy you have done it.

Note : Please make a back up of your device before install or update Firmware

Download Qmob S350 MTK6261 Flash File

About

Device name : Qmob

Model Number : s350

CPU Type : MTK6261

Language : Multi

Credit : Free

Requirements

1. Download and install MTK USB device driver
2. Download and install Cm2 or any supported box setup

Q MOB S350 Flash File Read Info

Wait for phone…
Phone found! [ 15 ]
Sync…
Sync Ok, read regs…
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 8B99199C9F57185A1572CF3835628D45
BROM Protocol Version : 05
Setting…
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target …
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now …

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info   : RDR61D_F109_PCB01_gprs_MT6261_S00.F109KLT10_QMOBILE_S350_161201.bin
FileVersion : F109KLT10_QMOBILE_S350_161201
Saved to : C:\InfinityBox\CM2MTK\Read_out\RDR61D_F109_PCB01_gprs_MT6261_S00.F109KLT10_QMOBILE_S350_161201.bin

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

How to Flash Q S350 Firmware

• Download and install MTK USB device driver
• Download Firmware and extract it
• Open Cm2 or any supported box setup.
• Choose correct device CPU type and Choose flash file.
• Wait while file added.
• Power off device,remove battery.
• Connect device with USB data cable through pc and insert battery again.
• Click on flash and wait while complete flash
• At the complete of Flash remove USB data cable,remove battery ,insert again and power on device.
• Enjoy you have done it.

Note : Please make a back up of your device before install or update Firmware

Download Vgo Tel venture v8 MT6580 Flash File

About

Device name : Vgo Tel

Model Number : venture v8

CPU Type : MT6580

Language : Multi

Credit : Free

Requirements

1. Download and install MTK USB device driver
2. Download and install Cm2 or any supported box setup

Vgo Tel venture v8 plus Flash File Read Info

- > Wait phone connected ... 

Phone found! [ 90 ]

Port Opened

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : mt6580 Crev eMMC Loader v2.0     

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

Model Name  : venture v8

Model Brand : vgotel

Model Device: venture

AndrVersion : 5.1

BaseBand CPU: vgotel venture v8

Project Ver : MRA58K release-keys

Model Ext   : vgotel venture v8

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin

[Read Ok] : u-boot.bin

[Read Ok] : prodnv.img

[Read Ok] : mt6580_CP0_modem.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : nvitem_w.bin

[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin

[Read Ok] : nvitem_wcn.bin

[Read Ok] : logo_480x800.bin

[Read Ok] : fblogo_480x800.bin

[Read Ok] : boot.img

[Read Ok] : system.img

[Read Ok] : sysinfo.img

[Build Ok] : cache.img

[Read Ok] : recovery.img

[Build Ok] : userdata.img

Android Info created

Firmware 

Saved to : G:\vgotel file_VGOTEL VENTURE V8_5.1_MRA58K_release-keys_VENTURE V8_1328092017\

Done

How to Flash Vgo Tel venture v8  Firmware

• Download and install MTK USB device driver
• Download Firmware and extract it
• Open Cm2 or any supported box setup.
• Choose correct device CPU type and Choose flash file.
• Wait while file added.
• Power off device,remove battery.
• Connect device with USB data cable through pc and insert battery again.
• Click on flash and wait while complete flash
• At the complete of Flash remove USB data cable,remove battery ,insert again and power on device.
• Enjoy you have done it.

Note : Please make a back up of your device before install or update Firmware

Download Vgo Tel i550 plus MTK6261 Flash File

About

Device name : Vgo Tel

Model Number : i550 plus

CPU Type : MTK6261

Language : Multi

Credit : Free

Requirements

1. Download and install MTK USB device driver
2. Download and install Cm2 or any supported box setup

Vgo Tel i550 plus Flash File Read Info

Wait for phone…
Phone found! [ 15 ]
Sync…
Sync Ok, read regs…
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 8B99199C9F57185A1572CF3835628D45
BROM Protocol Version : 05
Setting…
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target …
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now …

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info : KEYTAK61D_GB_11C_PCB01_gprs_MT6261_S00.T2014_VERSION.bin
Saved to : C:\InfinityBox\CM2MTK\Read_out\KEYTAK61D_GB_11C_PCB01_gprs_MT6261_S00.T2014_VERSION.bin

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

How to Flash Vgo Tel i550 plus Firmware

• Download and install MTK USB device driver
• Download Firmware and extract it
• Open Cm2 or any supported box setup.
• Choose correct device CPU type and Choose flash file.
• Wait while file added.
• Power off device,remove battery.
• Connect device with USB data cable through pc and insert battery again.
• Click on flash and wait while complete flash
• At the complete of Flash remove USB data cable,remove battery ,insert again and power on device.
• Enjoy you have done it.

Note : Please make a back up of your device before install or update Firmware

Download Vgo Tel i251 MTK6261 Flash File

About

Device name : Vgo Tel

Model Number : i251

CPU Type : MTK6261

Language : Multi

Credit : Free

Requirements

1. Download and install MTK USB device driver
2. Download and install Cm2 or any supported box setup

Vgo Tel i251 Flash File Read Info

Wait for phone…
Phone found! [ 15 ]
Sync…
Sync Ok, read regs…
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 8B99199C9F57185A1572CF3835628D45
BROM Protocol Version : 05
Setting…
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target …
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now …

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info : KEYTAK61D_GB_11C_PCB01_gprs_MT6261_S00.T2014_VERSION.bin
Saved to : C:\InfinityBox\CM2MTK\Read_out\KEYTAK61D_GB_11C_PCB01_gprs_MT6261_S00.T2014_VERSION.bin

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

How to Flash Vgo Tel i251 Firmware

• Download and install MTK USB device driver
• Download Firmware and extract it
• Open Cm2 or any supported box setup.
• Choose correct device CPU type and Choose flash file.
• Wait while file added.
• Power off device,remove battery.
• Connect device with USB data cable through pc and insert battery again.
• Click on flash and wait while complete flash
• At the complete of Flash remove USB data cable,remove battery ,insert again and power on device.
• Enjoy you have done it.

Note : Please make a back up of your device before install or update Firmware

Download QMOB X33 flash file

About

Device name : QMOB

Model Number : X33

CPU Type : 7731 6.0

Language : Multi

Password : No

Credit : Free

Requirements

1. Download and install SPD USB device driver
2. Download and install Cm2 or any supported box setup

QMOB X33 Flash File info                                                                     

- > Wait phone connected ... 

Phone found! [ 90 ]

Port Opened

Sync...

InitBoot Done [ 0x81 ] , Ver : SPRD3

Sync...

Sending FDL

[Info] : If SW freeze here more, than 15 seconds - remove cable

FDL Ready!

Boot Ver : SC7731 Crev eMMC Loader v2.0     

Sending FLASH FDL

FLASH FDL Ready!

Boot Ok!

Model Name  : QMobile_X33

Model Brand : QMobile

Model Device: QMobile_X33

AndrVersion : 6.0

BaseBand CPU: QMOBILE_X33

Project Ver : MRA58K release-keys

Model Ext   : QMobile X33

Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin

[Read Ok] : u-boot.bin

[Read Ok] : prodnv.img

[Read Ok] : sc7731C_CP0_modem.bin

[Read Ok] : DSP_DM_Gx.bin

[Read Ok] : nvitem_w.bin

[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin

[Read Ok] : nvitem_wcn.bin

[Read Ok] : logo_480x800.bin

[Read Ok] : fblogo_480x800.bin

[Read Ok] : boot.img

[Read Ok] : system.img

[Read Ok] : sysinfo.img

[Build Ok] : cache.img

[Read Ok] : recovery.img

[Build Ok] : userdata.img

AndroidInfo created

Firmware Size : 2623 MiB

Saved to : G:\Q flash file\x series\QMOBILE_X33_QMobile_X33_6.0_MRA58K_release-keys_QMobile_X33_1328092017\

Done!

How to Flash QMOB X33 Firmware

• Download and install SPD USB device driver
• Download Firmware and extract it
• Open Cm2 or any supported box setup.
• Choose correct device CPU type and Choose flash file.
• Wait while file added.
• Power off device,remove battery.
• Connect device with USB data cable through pc and insert battery again.
• Click on flash and wait while complete flash
• At the complete of Flash remove USB data cable,remove battery ,insert again and power on device.
• Enjoy you have done it.

Note : Please make a back up of your device before install or update Firmware