About
Device name : QMOB
Model Number : X33
CPU Type : 7731 6.0
Language : Multi
Password : No
Credit : Free
Requirements
- Download and install SPD USB device driver
- Download and install Cm2 or any supported box setup
QMOB X33 Flash File info
- > Wait phone connected ...
Phone found! [ 90 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!
Model Name : QMobile_X33
Model Brand : QMobile
Model Device: QMobile_X33
AndrVersion : 6.0
BaseBand CPU: QMOBILE_X33
Project Ver : MRA58K release-keys
Model Ext : QMobile X33
Read Mode] : HSUSB : 0x3000
[FW_READER] : Reading Firmware Now ...
[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_Trunk_W16.28.5_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x800.bin
[Read Ok] : fblogo_480x800.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img
AndroidInfo created
Firmware Size : 2623 MiB
Saved to : G:\Q flash file\x series\QMOBILE_X33_QMobile_X33_6.0_MRA58K_release-keys_QMobile_X33_1328092017\
Done!
How to Flash QMOB X33 Firmware
- Download and install SPD USB device driver
- Download Firmware and extract it
- Open Cm2 or any supported box setup.
- Choose correct device CPU type and Choose flash file.
- Wait while file added.
- Power off device,remove battery.
- Connect device with USB data cable through pc and insert battery again.
- Click on flash and wait while complete flash
- At the complete of Flash remove USB data cable,remove battery ,insert again and power on device.
- Enjoy you have done it.
Note : Please make a back up of your device before install or update Firmware
EmoticonEmoticon